The Virtual Foundry
Ceramic Filamet™ Sample
Ceramic Filamet™ Sample
Couldn't load pickup availability
Create real ceramic parts using any open-architecture FFF/FDM 3D printer—or even a 3D printing pen.
Available Formats:
1.75mm and 2.85mm diameters in 100g weight
| Ceramic Load By Mass |
Recommended Nozzle | Filament Density (g/cc) | |
|---|---|---|---|
| Basalt Moon Dust | 60.0 – 62.0% | 0.6mm Hardened Steel | 1.60 – 1.75 |
| Porcelain | 48.0 – 52.0% | 0.6mm Hardened Steel | 1.40 – 1.50 |
| Rapid 3DShield Boron Carbide | 50.0 – 60.0% | 0.6mm Hardened Steel | 1.30 – 1.50 |
| Silicon Carbide | 63.0 – 66.0% | 0.6mm Hardened Steel | 1.85 – 1.95 |
| Zirconium Silicate (Zircopax®) | 64.0 – 69.0% | 0.6mm Hardened Steel | 2.10 – 2.20 |
Samples are packaged spooless.
High Compatibility:
Works with virtually any open-architecture 3D printer—no proprietary hardware or specialized equipment required. Also compatible with 3D printing pens.
👉 Our list of Trusted 3D Printers – Click Here
Easy Printing Experience:
-
Prints similar to PLA
-
Minimal to no warping
-
Ensure the filament feeds straight into the extruder
-
Less hygroscopic than PLA
-
Do not dry this filament—drying will degrade the binder
👉 More information on printing – Click Here
Fully Sinterable:
Most of our ceramic filaments are fully sinterable. After printing, your part can be fired in a furnace to become 100% ceramic.
👉 Debinding & Sintering Instructions for tested materials – Click Here
Additional Links:
👉 SDS and TDS – Click Here
👉 Research Papers – Click Here
All materials print just like PLA on most open-architecture 3D printers.
Share
