Kyosho 97008-36H 3x36mm Hard Adjust Rod 2pcs

A pair of 3 x 36mm adjust rods in Kyosho's hard specification, from the universal 97008 turnbuckle series.

An adjust rod is a threaded turnbuckle with opposing threads at each end, which is what lets you change the length of a camber or steering link by turning the rod without removing it from the car. That is the difference between adjusting camber in thirty seconds between heats and pulling the suspension apart, and it is why these are on every serious 1/8 scale chassis.

The hard specification matters because a turnbuckle carries its load in compression along a long thin rod, which is exactly the loading case that causes buckling. A standard rod that has been bent in a crash will still function but sets your camber or toe wrong on one side, and that is a very easy thing to overlook when the car suddenly pulls to one side. A harder rod resists that bending far better.

At 3 x 36mm this is one specific length in a family that runs across many sizes, so check the length you need before ordering. Kyosho lists it across the Inferno MP9 and MP10 families, MP9e, MP10e, MP10T and Inferno GT3. Two are supplied.