Natural COEXNylex™ Unfilled Nylon

Natural COEXNylex Unfilled Nylon is made from nylon resin. It prints on most 3D printers and makes durable, strong parts.

Recommended print settings

• Hotend: 245–295°C
• Bed: 85–110°C, on a solvent-cleaned surface
• Part cooling fan not recommended. It can cause layer delamination.
• Retraction: start at 1–1.5 mm at 10–30 mm/s for direct-drive extruders, or 2.5 mm at 30–35 mm/s for indirect-drive extruders

Specs

• Material: COEXNylex unfilled nylon
• Tolerance: ±0.03 mm (1.75 mm) · ±0.06 mm (2.85 mm)
• Other spool sizes available by request: contact us.
• Extruded, quality controlled and shipped from one plant in Green Bay, WI.

Print settings · Slicer profiles