Team Associated ASC25874 MT10 Rear Hub Set

The rear hubs carry the rear axles and wheel bearings on the Team Associated Rival MT10 Classic and connect the rear suspension arms to the wheels. They hold the bearings in alignment and set the rear wheel position, so they take the full load of acceleration, landings, and side impacts.

Worn bearing seats or elongated pivot bores let the rear wheels move independently of the arms, which introduces slop into the rear end. The truck then feels unsettled under power and squirms on landings instead of tracking straight, and the extra movement chews through wheel bearings faster than normal.

Fitting a fresh hub set restores tight, correctly aligned rear geometry and lets the bearings sit properly again. These are direct replacements for the stock Rival MT10 Classic rear hubs and use your existing bearings, axles, hinge pins, and hardware, so installation needs no modification. Replacing them is a natural part of a rear-end rebuild and an easy way to sharpen up how the truck puts power down.