Team Associated ASC6264 M3x35mm Turnbuckles

These M3x35mm turnbuckles are genuine Team Associated hardware used to build adjustable camber links, toe links, and steering linkages across several platforms, including RC10 Classic buggies, the RC10CC, RC8B4 buggies, and TC7 touring cars. A turnbuckle threads into rod ends on each side, letting a driver dial in precise camber, toe, and ride height changes by turning the barrel rather than swapping fixed-length links, which makes chassis tuning fast and repeatable at the track. Machined from aluminum with wrench flats for easy adjustment, these turnbuckles resist bending under hard cornering loads and impacts far better than a bent or cross-threaded factory link, keeping suspension geometry consistent from run to run. A bent or seized turnbuckle throws off alignment and can bind the suspension entirely, so replacing a damaged one restores accurate, repeatable tuning. This is a direct factory replacement matched to the original 35mm/1.375in length and M3 thread pitch, not a different size, and threads onto the stock rod ends on every listed platform. Keeping spares on hand is worthwhile since turnbuckles are among the most frequently bent parts after a hard crash or rollover.