Traxxas 6496X Gear 24-T Pinion

24-tooth pinion gear, 1.0 metric pitch, sized for a 5mm motor shaft. Set screw included.

Pinion size is the easiest gearing change you can make. A larger pinion raises top speed and pulls taller gearing, at the cost of low-end punch and with more heat going into the motor and ESC. Smaller does the opposite.

Important: Traxxas specifies this pinion for use only with steel spur gears.

Fits: Traxxas Maxx Slash (102076-4) and other Traxxas models using a 5mm motor shaft with 1.0 metric pitch gearing.

Monitor motor and ESC temperatures after any gearing change.